Optical power monitoring for absolute optical power measurement
Applications
Excimer lamp monitoring
Low pressure mercury lamp monitor
UV light monitor
UV furnace (coating, adhesive, printing)
UV cleaning, UV sterilization
Inproving surface characteristics
Features
Absolute optical power monitoring (mW/cm2) We also append a Certificate of Calibration.
Detachable sensor head / remote measurement The detachable sensor head allows remote measurement on a conveyer belt of UV oven, etc.
Thin, flat sensor head allows the sensor head to be used closer to a light source.
External control: RS-232C The main unit has RS-232C interface for external control.
Stable performance at deep UV since no optical filters are used Specific UV light can be directly detected without any optical filter.
Wide light incident angle Acceptable light incident angle is close to cos θ, even without using diffusers
Overview Our UV power meters directly measure UV light at specific wavelengths. Our sensor heads use a UV sensor (phototube) that ensures stable UV measurement over a long period of operation and is calibrated in combination with the controller bases on NIST standards.
The detachable sensor head contains a rechargeable battery for UV detection and data memory, allowing remote measurement such as on a belt conveyor or in locations where cable routing is difficult.
In addition to external control via the RS-232C interface, an anlog control is available for recording on a data recorder.
