Go to previous product

Go to next product

Part number	Type	Name of product
C7780-20	Cameras	ORCA-3CCD, Rear Cable Mount

The ORCA-3CCD cooled digital color camera incorporates three cooled CCD chips, providing the rapid readout, high-resolution and superior S/N ratio of the Hamamatsu ORCA digital camera series. The three color CCDs employ an RGB prism to achieve extremely high quality color representation without color blur, performance difficult to achieve with a single-CCD camera. The CCDs used are the same as those used in the ORCA ER, providing proven high quantum efficiency and high resolution, cooled to 0°C for high sensitivity detection. It is suitable for a wide range of applications, from brightfield (ie.stained pathological specimens) to fluorescent specimens using GFP and fluorescent antibodies.

Close  Datasheet:  122 KB

Key Specifications

Part number C7780-20 Name of product ORCA-3CCD, Rear Cable Mount Spectral response min 350nm Spectral response max 690nm Features Total 4.13 million pixels Total 36 bit color resolution Cooling temperature of 0 °C Individual R,G,and B exposure settings 8 x 8 binning capability 9.1 Hz full speed display Low readout noise design (13 electrons r.m.s. typ.) Applications Color digital time-lapes recording Fluorescence Resonance Energy Transfer studies Fluorescence In Situ Hybirdization studies Histology, Pathology and Cytology Imaging device progressive scan interline CCD Horizontal number of pixels 1344 Vertical number of pixels 1024 Cell size - horizontal 6.45µm Cell size - vertical 6.45µm Effective Horizontal Size 8.67mm Effective Vertical Size 6.6mm Pixel clock rate Scan Mode 1 16Fr/sec Frame Rate Scan Mode 1 49.2 with 8x8 binningr.m.s. Read noise Scan Mode 1 13electrons Full well capacity Scan Mode 1 18.000 Dynamic Range Scan Mode 1 1384:1bits A/D converter Scan Mode 1 12 Dark current 0.5e-/pix/sec Cooling Method Peltier cooling with air radiation Cooling Temperature 0 Output type RS644 (LVDS) Exposure time min 128ms Exposure time max 10secs External control RS-232C Sub-array yes Binning yes External trigger yes Lens mount 2/3 inch bayonet mount (flange back 48mm) Line voltage 100/117/220/240 Vac50/60 Hz