Go to previous product

Go to next product

Part number	Name of product
C7780-10	ORCA-3CCD. Front Cable Mount

Click image to enlarge	The ORCA-3CCD cooled digital color camera incorporates three cooled CCD chips. providing the rapid readout. high-resolution and superior S/N ratio of the Hamamatsu ORCA digital camera series. The three color CCDs employ an RGB prism to achieve extremely high quality color representation without color blur. performance difficult to achieve with a single-CCD camera. The CCDs used are the same as those used in the ORCA ER. providing proven high quantum efficiency and high resolution. cooled to 0°C for high sensitivity detection. It is suitable for a wide range of applications. from brightfield (ie.stained pathological specimens) to fluorescent specimens using GFP and fluorescent antibodies.
Close  Datasheet:  47 KB

Key Specifications	Typical Spectral Response
Part number C7780-10 Name of product ORCA-3CCD. Front Cable Mount Min 350 nm Max 690 nm Features Total 4.13 million pixels Total 36 bit color resolution Cooling temperature of 0 °C Individual R.G.and B exposure settings 8 x 8 binning capability 9.1 Hz full speed display Low readout noise design (13 electrons r.m.s. typ.) Applications Color digital time-lapes recording Fluorescence Resonance Energy Transfer studies Fluorescence In Situ Hybirdization studies Histology. Pathology and Cytology Imaging device progressive scan interline CCD Horizontal number of pixels 1344 Vertical number of pixels 1024 Cell size - horizontal 6.45 µm Cell size - vertical 6.45 µm Effective Horizontal Size 8.67 mm Effective Vertical Size 8.6 mm Pixel clock rate Scan Mode 1 16 MHz/pixel Frame Rate Scan Mode 1 49.2 with binning fps Read noise Scan Mode 1 13 e-r.m.s. Full well capacity Scan Mode 1 18.000 e- Dynamic Range Scan Mode 1 1384:1 A/D converter Scan Mode 1 12 bit Dark current 0.5 e-/pix/sec Cooling Method Peltier cooling with air radiation Cooling Temperature 0 °C Output type RS644 (LVDS) Exposure time min 128 msec. Exposure time max 10 sec External control RS-232C Sub-array yes Binning yes External trigger yes Lens mount 2/3 inch bayonet mount (flange back 48mm), optional F-Mount Line voltage 100/117/220/240 V 50/60 Hz Power consumption 77 VA Sensitivity Range - min 350 KV Sensitivity Range - max 690	Click image to enlarge   Configuration Click image to enlarge