C9100-14 ImageM-1K Camera

Part number	Name of product
C9100-14 (ImageM-1K)	ImagEM-1K (Back-Thinned Electron Multiplier CCD Camera)

Click image to enlarge

The ImagEM-1K is a brand new member of the C9100 camera series. Combining our decades of experience with high vacuum technology and all the latest advances in CCD circuit design this new camera offers application independent imaging. From the very brightest high dynamic range applications to single photon imaging over long integrations, this camera provides images with the very best signal to noise ratios. The key to this versatility is the E2V CCD97 CCD and Hamamatsu creative engineering. New methods for driving this well known CCD offer special modes of operation for fast, low noise operation and special patent pending synchronization with spinning disk confocal and multi-point confocal microscopes.

With both on-chip multiplication and normal CCD readout amplifiers, a choice of readout speeds is included to match the signal to noise requirements of the application. New on-board signal processing features provide a choice of real time frame averaging, background subtraction with offset and shading correction. Unmatched cooling and cooling stability provided the very best in quantitative data collection even at high frame rates.

And now the new ImagEM-1K offers a high resolution format of 1024 x 1024 pixels and 13 mm pixels for high N.A. imaging.

Read the EM-CCD Technical Note (PDF, 20 pages, 876 KB).

More Information on www.imagemccd.com


Close

Datasheet:

703 KB


Close

Key Specifications

Drawing

Part number	C9100-14 (ImageM-1K)
Name of product	ImagEM-1K (Back-Thinned Electron Multiplier CCD Camera)
Features
-80 °C cooling with hermetic sealed head Air or water cooled Gain stability/Temperature stability Dual readout mode Multiple pixel clock selection Photon imaging mode (Patent pending) Real time image processing External trigger/Synchronous readout trigger (Patent pending) Programmable trigger signal output Multiple heads capability
Applications
Intracellular ion imaging Intravital fluorescence microscopy and blood flow studies Fast tracking of small particles Single molecule observation at the photon level High speed fluorescence cell tomography High dynamic range brightfield imaging NIR and NIR DIC imaging Luminescence imaging
Imaging device	Back-thinned Frame transfer CCD
Shutter	No
Horizontal number of pixels	1024
Vertical number of pixels	1024
Cell size - horizontal	13 µm
Cell size - vertical	13 µm
Effective Horizontal Size	13.3 mm
Effective Vertical Size	13.3 mm
Pixel clock rate Scan Mode 1	EM-CCD mode: 11 MHz, 2.75 MHz, 0.69 MHz/pixel
Pixel clock rate Scan Mode 2	Normal CCD mode: 2.75 MHz, 0.69 MHz
Frame Rate Scan Mode 1	Fastest in EM-CCD mode (with binning and subarray) 9.5fps to 231 fps
Read noise Scan Mode 1	EM-CCD Gain 4x: 11 MHz: 12 e r.m.s., 2.75 MHz: 10 e r.m.s., 0.69 MHz: 4 EM-CCD Gain 1200x: at all clock speeds: <1 e^-r.m.s.
Read noise Scan Mode 2	Normal-CCD: 2.75 MHz: 19 e r.m.s. , 0.69 MHz: 10 e^-r.m.s.
Full well capacity Scan Mode 1	400,000 e^-, Max 730,000 e^-
A/D converter Scan Mode 1	16 bit
Dark current	Forced-air cooled (-55°C) 0.01 e^-/pix/sec Water cooled (-70° C) 0.001 e^-/pix/sec
Cooling Method	Multi-stage Peltier with forced air or water
Cooling Temperature	Air cooling Mode: -55 °C. Water cooling Mode: -80 °C
Output type	Camera link
Exposure time min	0.01 msec.
External control	Camera link
Sub-array	Yes
Binning	Yes, 2x2, 4x4 standard (8x8 and 16x16 optional)
External trigger	Yes. Programmable delay, pulse width, and polarity
Contrast Enhancement	No
Lens mount	C-mount
Line voltage	AC 100 V to 240 V, 50 Hz/60 Hz
Power consumption	140 VA

Click image to enlarge

Typical Spectral Response

Click image to enlarge