Login  .  Language
  Home   Products   Applications   Support   Corporate   Contact us  
   
 
System Division
 
Bio Imaging Instruments
Cameras
Life Sciences Brightfield and NIR
Life Sciences Fluorescence
Life Sciences Luminescence
Physical + Laboratory
Product list
Parametric Search
Request Info
Request Quote
Spectroscopy
Industrial Imaging
All UV-VIS-IR Cameras
UV Cameras
IR Cameras
Gated Image Intensifier Units
Intensified Cameras / ICCD
Gated ICCD Cameras
Board Level Cameras
Software
Machine Vision
Ultra Fast
Non-Destructive Testing / X-ray
Semiconductor Industry
Laser & Fiber Optic Measurement
Spectroscopy
Systems for solar cell evaluation
Body Line Scanner
Medical Instruments
Drug Discovery Instruments / FDSS
Virtual Microscopy / NanoZoomer
Go to previous product

Go to next product

Part numberName of product
C10600-10B ORCA-R2 1k x 1k, 28 MHz digital CCD camera, cooled


Click image to enlarge

The C10600-10B (ORCA-R2) offers high-quality imaging over a wide spectral range, with especially high sensitivity in the visible and near-infrared regions. Its CCD sensor is encased in a maintenance-free, hermetic vacuum-sealed chamber which ensures efficient camera cooling by either air or water. Thanks to this cooling structure and an advanced external circuit design, the C10600-10B also provides rapid readout with minimal noise. In normal scan mode, readout is 8.5 frames per second at full spatial resolution. In fast scan mode, frame rates range from 16.2 to 115.1 frames per second at varying levels of resolution.

Download the ORCA-R2 Technical Note(PDF, 8 pages, 432 KB)

For more information, please visit www.orca-r2.com

 
 Datasheet:  453 KB 
 
 
Key Specifications Drawing

Part number C10600-10B ORCA-R2
Name of product 1k x 1k, 28 MHz digital CCD camera, cooled
Min
300 nm
Max
1050 nm
Features
  • 28 MHz readout rate at 1k x 1k full resolution
  • Spectral response from UV to NIR
  • Low readout noise (6 electrons r.m.s. in normal scan mode)
  • Dynamic range up to 6000:1 (normal scan mode)
  • Binning and sub-array function
  • IEEE 1394b interface
Applications
  • Fluorescence microscopy
  • Live cells expressing GFP
  • Red to NIR fluorescence application
  • Ratio imaging
  • Fluorsescence in situ hybridization (FISH)
  • IR-DIC and fluorescence imaging
  • Cell, tissue pathology
  • Time lapse fluorescence imaging
  • TIRF microscopy, real-time confocal microscopy
  • Failure analysis
  • Semiconductor inspection
  • X-ray scintillator readout
Imaging device Progressive scan interline CCD
Shutter No
Horiz. pixels 1344
Vertical pixels 1024
Cell size - horiz. 6.45 µm
Cell size - vertical 6.45 µm
Effective Horizontal Size 8.67 mm
Effective Vertical Size 6.6 mm
Pixel clock rate 14.00 (normal scan) or 28.00 (fast scan) MHz/pixel
Frame Rate Max. with binning, sub-array: 115.1 fps
Read Noise 6 (normal scan) or 10 (fast scan) e-r.m.s.
Full well capacity High dynamic range OFF: 18000 e-
A/D converter 12 or 16 bit
Dark current (At -40 ºC) 0.0005 e-/pix/sec
Cooling Method Peltier cooling, forced air or water
Cooling Temp. Forced air: -35, water: -40 °C
Exposure time min 10 msec.
Exposure time max 4200 sec
External control IIDC 1394-Based Digital Camera Specification Ver. 1.3.1
Sub-array yes
Binning 2 x 2, 4 x 4, 8 x 8
External trigger Edge trigger, Level trigger, Synchronous readout trigger, Start trigger
Lens mount C-mount
Power consumption approx. 60 VA


Click image to enlarge
Typical Spectral Response

Click image to enlarge

 

Configuration

Click image to enlarge
   


 
 
© Hamamatsu Corporation. Customer privacy is important, please read our privacy statement. Please send comments/questions about this page to the Webmaster.